How To Install A Fence

You have decided to put in a fence, and now you have to install it. Whether you choose to install it yourself or have it professionally installed, there are certain steps you must take. As you move forward, use this guide to help you install your fence properly. If you are installing it yourself, you will need to follow each step for your benefit. If someone else is installing the fence, having the knowledge of the process can help as you watch the professional install it. Fence Installation

Before Starting

Before the process begins, you have to do some research and calling to make sure you are building your fence in the right place. This means you will get a visit from the zoning authority who will look at your property and place something where utilities are buried, or easements exist. You need to be careful not to damage anything underground, or you may be responsible for fixing it. Fence Repair

After that, you need to find out if you need a fence-building permit before starting. You should also find out if there are any height restrictions or anything to follow if you have a homeowners association.

Digging

Once you start digging, you must dig the holes for the support posts deep enough. This should be calculated based on the height of the fence. Then you need to determine how far apart the posts need to be and for a privacy fence, this is typically 8 feet. It can differ depending on what materials are used, so you should do the proper research first. Privacy Fences

Setting The Fence

To ensure your fence line is even, you must set your corner posts first. You will need concrete to set your posts, and it is recommended to only mix enough concrete for one post at a time. Before the concrete dries, you should level the post. This is a crucial step for correctly building your fence. If you begin the fence correctly, it will go a lot easier as you progress. Setting the posts in concrete will need to go quickly because concrete dries fast, especially on a hot day.

Fence Rails and Boards

Now it is time to install the fence rails, which are the support on the inside of the fence to help support it. For a cleaner look from the inside, sometimes these rails will be installed on the outside of the fence. This can be dangerous because potential intruders can jump over your fence more easily. Wood Fences

Then you can place the fence boards using screws. Start near the corner post and install the next one by the opposite post. Every time you install a board, you should use a level and measure the height. Continue with this process while using spacers until all boards are in place.

Each step in this process is just as important as the last. If one mistake is made, it can affect the entire fence, and you might have to start over. By doing a thorough job, you will have a long-lasting fence that you can enjoy for years to come. Follow this step-by-step guide to install it yourself or oversee a professional installation. Fence Company

Leave a Reply

Your email address will not be published. Required fields are marked *